A one-part general purpose polyurethane that chemically reacts with moisture to deliver flexible bonds with good adhesion to wood, fiberglass, gelcoat, certain plastics and metals. Paintable and More...

The perfect cure for dry rot and restores the strength of wood. Pours into finest openings, penetrates deep and completely saturates wood, arresting the progress of dry rot by encapsulating fibers. More...

Polyurethane sealer. Tack free in 48 hours. Cures in 5-7 days with no shrinkage. Extremely strong above or below waterline. Stays flexible. Bonds and seals fiberglass deck to fiberglass hull, wood to More...

Becomes tack free in one hour and fully cures in approximately 24 hours. Retains its strength above or below the water line.

Adheres to metal, fiberglass, glass, non-oily woods and many plastics and abraded rubbers. Ideal for head and galley sealing applications. Also excellent gasket adhesive and formed-in-place gasket More...

The #1 selling marine sealant and is 100% marine grade silicone that won’t turn yellow, shrink or sag. Remains flexible from -70° to +480° F. Bonds to fiberglass, plastic, wood, glass and metal. More...

Handles like putty, hardens like steel and sands like wood. Non-magnetic, non-rusting and non-corrosive. Self hardening plastic metal. Repairs damaged and leaky hulls, dry rot, cracked crank cases, More...

Bostik® Marine 920 is a one part, gun grade urethane sealant/adhesive that moisture cures to an extremely tough, resilient seal which exhibits excellent tear and abrasion resistance while retaining More...

Bostik Marine 940 FS is specifically formulated to withstand harsh marine environments. It possesses UV resistance (non-yellowing); is sandable and paintable. It exhibits superior adhesion to porous More...

Bostik® Marine 960 SR is specifically formulated to withstand the harsh marine exposures that are encountered in “above deck” applications. Bostik® 960 SR eliminates the damaging effects of UV (960 SR More...

A single component acetic acid cure industrial sealant that cures to a tough, flexible, rubbery elastomer. Its outstanding weather-ability allows the sealant to retain its original adhesion, More...

High strength flammable solvent based contact cement. Fast drying, oil and waterproof. Requires no clamping. Suitable for bonding decorative laminate, wood, particleboard, metal, rubber, hardwood, More...

A one part, fast skinning (10 minutes) and curing (1-7 days) product with superior strength, adhesion, elongation and life. Cures in temperatures from -20 to +120° F. Wet sand or paint after cure. More...

A one part sealant that cures to form a firm, rubbery waterproof seal. Its flexibility allows for the dissapation of stress caused by shock, vibration, swelling or shrinking. Use above or below the More...

Paintable epoxy seeks, fills and seals cracks in fiberglass, wood and metal. Hard protective coating flexes with hull movements. Deteriorated wood can be renewed with a few strokes to penetrate and More...

Designed specifically for fiberglass boats. A fast-curing (24 hours) polyurethane/silicone adhesive sealant. Permanently flexible, non shrinking. Outstanding adhesion to fiberglass, glass, plastic and More...

Long lasting, permanently flexible marine polysulfide sealant which can be sanded, painted and used above and below the waterline. Tack-free in 1 to 3 days, excellent resistance to teak oils, gasoline More...

For sealing the finest cracks and seams. The only liquid sealant that does not shrink when cured. Flows into the smallest cracks and seams and stays. Cures to a firm bond with the same lifetime More...

This solvent-free outdoor carpet adhesive is non-flammable and water-resistant. Use on marine-grade plywood, fiberglass, or aluminum. One gallon covers up to 125 square feet.